Power Box Sensor V3 with MPX plug
The PowerBox Sensor is absolutely ideal for our kit models. I use these in our Big Tiger, Piper, Taylorcraft and the Avro Tutor for some considerable time. The PowerBox Sensor eliminates the risk of a mechanical switch failure.
By using the latest components we have been able to reduce the size of the Sensor V3 significantly. For example, the case is now exactly half as deep (11 mm compared with 22 mm). Nevertheless, the Sensor V3 still fits neatly in the aperture used by its predecessor.
The introduction of a top-quality aluminium case, machined and anodised, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox Sensor V3 is around 35 % higher. In fact, the peak load capacity is twice as high: the Sensor V3 can handle more than 20 A for several seconds!
The Sensor V3 offers two user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, while a regulated 7.8 V is available for HV servos– provided that the batteries supply the higher input voltage required.
Power to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colours to display the charge status of the batteries.
Specifications:
- Operating voltage 4.0 V - 9.0 V
- Power supply 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMh
- Current drain Power-on state 30 mA
- Current drain Standby 10 µA
- Maximum load current Peak 2x 10 A
- Drop-out voltage 0.25 V
- Output voltage 6.0 V/ 7.8 V regulated
- Dimensions 65 x 26 x 11 mm
- Weight 30 g
- Temperature range -30 °C bis +105 °C
Product safety information
Manufacturer information:
PowerBox Systems
, ,
| Item information |
Value |
| Shipping weight: |
0,08 kg
|
| Item weight: |
0,03 kg
|
